Products
Jet Fans CGF
- Centrifugal design car park jet fans in a unidirectional execution.
- The jet fan consists of a flat centrifugal fan Aluzink casing with an inlet cone on the bottom side to minimize the inlet losses.
- On the inlet side wire guards are mounted.
- With a special internal deflector the air stream flows in the desired direction.
- As standard, the jet fans are equipped with mounting feet for direct mounting to the ceiling.
- All fans are statically and dynamically balanced in accordance with VDI 2060, ISO 1940 Class Q 6.3.
- The motor is two-speed 3x400V, 50Hz for direct start.
- Motor protection min. IP55 in accordance with IEC 34-5.
- Insulation class F or H depending on temperature protection.
- The centrifugal jet fans have a terminal box which is integrated into the fan housing.
- As standard, all jet fans are delivered in an Aluzink execution.
- The standard operating temperature is from -20°C until +40°C.
- Jet fans for hot smoke removal are certified in accordance to the EN 12101-3 in the classes F200 and F300.
- All F300 fans have been tested at 300°C / 120 min
