Products
Jet Fans AUZ ARP
- Oval design car park jet fans in a unidirectional (AUZ) and fully reversible (ARP) version.
- This range of oval jet fans excels in low noise levels.
- The installation height is 422mm.
- The internal fan housing consists of a round fan casing with flanges.
- Oval silencers have been mounted on both sides on the fan casing.
- With deflectors the air stream flows in the desired direction.
- On the reversible version deflectors are mounted on both sides of the fan.
- The impeller is coupled directly onto the motor shaft.
- The silencers are an Aluzink execution.
- A powder coating in any desired color is available as an option.
- As standard, the fan casings and mounting frames are hot-dip galvanized steel.
- The fan has been constructed with guide vanes for an optimal aerodynamic efficiency.
- On the unidirectional version a wire guard is mounted on the inlet side and a deflector on the discharge side.
- As standard, the jet fans are equipped with mounting feet for direct mounting to the ceiling or wall.
- The impeller consists of a hub in which special casted aluminium impeller blades have been mounted
- The impeller is coupled directly onto the motor shaft.
- All fans are statically and dynamically balanced in acc. with VDI 2060, ISO 1940, 1-1986 Class Q 6.3.
- The motor is two-speed 3x400V, 50Hz or 3x380V, 60Hz for direct start.
- Motor protection min. IP55 in accordance with IEC 34-5.
- Insulation class F or H depending on temperature protection.
- The jet fans are equipped with a terminal box on the outside of the fan casing.
- As standard, the fan casings and mounting frames are hot-dip galvanized steel.
- The silencers are an Aluzink execution.
- A powder coating in any desired color is available as an option.
- The standard operating temperature is from -20 until +40°C.
- Jet fans for hot smoke removal are certified according to the EN 12101 part 3 in the classes F200/F300/F400.
- All F300 fans have been tested at 300°C / 120 min
- Class F400 is only available for 50Hz
