Products
Jet Fans AUT ART
- Basic car park jet fans in a unidirectional (AUT) and fully reversible (ART) version.
- The installation height is 422 mm.
- On both sides internal wire guards are mounted.
- With a special internal deflector the air stream flows in the desired direction.
- On the reversible version internal deflectors are mounted on both sides of the fan.
- The impeller is coupled directly onto the motor shaft.
- As standard, all jet fans are delivered in a galvanized execution.
- A powder coating in any desired color is available as an option.
- The jet fan consists of a round fan casing with an inlet cone on both sides to minimize the inlet losses.
- The fan has been constructed with guide vanes for an optimal aerodynamic efficiency.
- As standard, the jet fans are equipped with mounting feet for direct mounting to the ceiling or wall.
- The impeller consists of a NovAx hub in which special casted aluminium impeller blades have been mounted at a pre-determined pitch angle.
- All NovAx fans are statically and dynamically balanced in accordance with VDI 2060, ISO 1940 Class Q 6.3.
- The motor is two-speed 3x400V, 50Hz or 3x380V, 60Hz for direct start.
- Motor protection min. IP55 in accordance with IEC 34-5.
- Insulation class F or H depending on temperature protection.
- The jet fans have external terminal boxes.
- As standard, all jet fans are delivered in a galvanized execution.
- A powder coating in any desired color is available as an option.
- The standard operating temperature is from -20 to +40°C.
- Jet fans for hot smoke removal are certified according to the EN 12101 part 3 in the classes F200/F300/F400.
- All F300 fans have been tested at 300°C / 120 min
- Class F400 is only available for 50Hz
